All-in-one package unit consists of a conveyor and FILSTAR：
By connecting three lines of inlet, outlet and overflow of All-in-one
FILSTAR to the existing tank,
highly efficient filtration can be realized easily.
Sludge is raked out automatically by the conveyor and maintenance-free
solution management is achieved just after installation.
FILSTAR conveyor unit
Suction of a used solution followed by filteration
at 10μm particle size, delivery of the cleaned solution and discharge of the
sludge provides full-automatic operation only by switching on the
unit. Maintenance-free solution management can be realized just after the
installation.
Features
The unit can be attached to the existing coolant tanks of the machining
equipment.
The removed sludge is raked out automatically.
Highly compact design is achieved. (200mmx1150mmx1250mm)
Collection efficiency of more than 90% of particulates is available at 10μm
to 4mm in size.
Flow rate is changable in the range of 15L - 50 L/min
Specifications of conveyor unit
Model
KS15-CU
KSS20-CU
KSM25-CU
Flow Rate
15～20Ｌ/min
20～30Ｌ/min
30～50Ｌ/min
Particle Size on Separation
10μm～2mm
10μm～3mm
10μm～4mm
Pipe size
15Ａ
20Ａ
25Ａ
Dimensions
200mmx1,150mmx1,250mm
Power Supply
AC100V 50/60 or AC200V 50/60
Fluids
Water soluble cutting oil , Flushing Water , Water(Low Viscosity Fluids)
FILSTER PU (pump unit)
All-in-one package unit consists of a pump and FILSTAR：
By connecting two lines of the inlet and the outlet of All-in-one FILSTAR
to the existing tank,
highly
efficient filtration can be realized easily.
Drain cup is attached to discahage the removed sludge. Easy-maintenance
solution management can be realized just after the installation.
FILSTAR pump unit
Suction of a used liquid followed by filteration at
10μ particle size, delivery of the cleaned liquid provides full-automatic
operation only by switching on the unit. Easy-maintenance solution management
can be realized from the first day of the
installation.
Features
The unit can be attached to the existing coolant tanks of the machine
tools.
The removed sludge is accumulated in the attached drain cup.
Highly compact design is achieved. (200mmx900mmx1000mm)
Collection efficiency of more than 90% of particulates is available at 10μm
to 4mm in size.
Flow rate is changable in the range of :15L - 50 L/min
Specifications of pump unit
Model
KS15-PU
KSS20-PU
KSM25-PU
Flow Rate
15～20Ｌ/min
20～30Ｌ/min
30～50Ｌ/min
Particle Size on Separation
10μm～2mm
10μm～3mm
10μm～4mm
Pipe size
15Ａ
20Ａ
25Ａ
Dimensions
200mmx900mmx1,000mms
Power Supply
AC100V 50/60 or AC200V 50/60
Fluids
Water soluble cutting oil , Flushing Water , Water(Low Viscosity Fluids)
A proposal from industria (based on applied patents)
・The whole used solution is suctioned and filtered by FILSTAR.
To prevent the sludge precipitation in the tank and
reduce solution make-up.
・The existing tank is always filled with the clear solution cleaned
by FILSTAR.
To supply particulate-free (10μm or larger in size) and
clean solution to the process
・Solution can be circulated between the used-solution tank and the exsisting
solution tank without any large scale construction of new tanks.
To save cost and space
・The pump unit provides a clear solution by filteration at 10μm just after
the installation!
No sludge removing! No tank cleaning! No filter-element replacing!
To be free form maintenance
1.Place industria's simple used-solution tank in the existing tank.
2.Set the simple used-solution tank beneath the outlet nozzle of the used
solution in order to recover the whole volume.
3.Connect the outlet nozzle of FILSTAR to the existing tank and the inlet
nozzle of FILSTAR to the simple used-solution tank.
4.Switching on CU/PU unit to start circulation the solution.
All-in-one FILSTAR
FILSTER CU (conveyor unit)
